Garmin STRIKER™ 4, With Dual-beam Transducer

Spesialpris 1 481,01 kr Regular Price 1 747,64 kr
In Stock (3-6 dagar)

3,5-tums CHIRP Fishfinder med GPS

  • Lättanvänd 3,5-tums fishfinder i färg med inbyggd, högkänslig GPS
  • Hitta fisk: markera och återvänd till dina fiskeställen, hamnar och ramper
  • Knappar gör det enkelt att använda
  • Innehåller CHIRP-ekolodsgivare (77/200 kHz), sändningseffekt (200 W RMS)/(1 600 W topp-till-topp)
  • Uppgradera till högpresterande CHIRP med en GT8- eller GT15-givare (säljs separat)

Finding fish is easier than ever with STRIKER 4 fishfinder. Mark and return to your hot spots, boat ramps and docks, and share your favorite waypoints and routes with other STRIKER and echoMAP™ combos. Smooth Scaling™ graphics provide uninterrupted imagery when switching between depth-range scales. Sonar history rewind allows you to scroll back through sonar images to mark waypoints you originally may have missed. Plus, it has a built-in flasher and displays speed data. Includes tilt/swivel mount, CHIRP (77/200 kHz) transducer with transom and trolling motor mounting hardware and cable. For high-performance CHIRP, purchase a GT8 or GT15 transducer (each sold separately).

Experience the Clarity of CHIRP

STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.

Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.

You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what’s below.

Mark Spots with High-sensitivity GPS

Unlike regular fishfinders, STRIKER fishfinders have built-in, high-sensitivity GPS to locate your current position quickly and precisely, then maintain your GPS location anywhere you go on the lake. More importantly, they allow you to mark spots where the fish are biting so you can return to them again in the future. You also can mark docks, boat ramps and other locations on the lake. Just follow the path created on your screen to return to them whenever you wish.

Navigate Easily with Waypoint Map

Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It’s also a great tool for finding your way back to the boat ramp.

Check Your Speed on Screen

You can quickly and easily see your boat’s speed on the screen of your STRIKER fishfinder. It’s a great tool to make sure you are trolling at the right speed for the lure you’re using and for a particular fish species. It’s also a good way to tell if you are going the right speed in wake-controlled areas.

Fish Vertically with Built-in Flasher

STRIKER provides you with both a fishfinder and flasher all in 1 unit. Anytime you are stationary fishing, such as ice fishing or jigging for crappie, the built-in flasher will show you the bottom, whether it is solid or muddy, your jig or weighted bait, and the depth of fish as they swim into the sonar beam. You can even watch how high your jig is being lifted and dropped and whether fish move toward or away from it.

Take Your Fishfinder Anywhere

A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it’s perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.

Physical & Performance

Display Size1.9'' x 2.9'' (4.9 x 7.3 cm); 3.5'' diag, (8.7 cm)
Power Input10 to 20 Vdc
Display resolution480 x 320 pixels
Dimension3.6'' x 5.9'' x 1.6'' (91.6 x 150.8 x 42.8 cm)

Traditional: 50/77/200 kHz
CHIRP (mid and high)


0.5 lbs (230 g)

Mounting Optionsflush, tilt/swivel
Display TypeHVGA color

Maps & Navigation

Navigation Routes100


Transmit power200 W (RMS)
NMEA 0183 CompatibleNo
Has built-in receiverYes
USB portsNo
Autogain technology (minimizes clutter; maximizes targets)Yes
(Sounder) SideVüNo
LakeVü g3 UltraNo
Water temperature sensor includedYes
NMEA 2000 CompatibleNo
Track points50,000
Panoptix™ sonarNo
A-scope (real time display of fish passing through transducer beam)Yes
Adjustable depth line (measures depth of underwater objects)Yes
LakeVü g3No
Typical current draw0.23 A
Supports WAASYes
Max current draw1.0 A
Built-in Auto GuidanceNo
BlueChart g3No
Standard MappingNo
LakeVu (inland)No
Fish Symbol ID (helps identify fish targets)Yes
Displays sonarYes
Water Temperature LogYes
ANT+ (Connectivity)No
BNC external GPS antenna portNo
BlueChart g3 VisionNo
Garmin Wi-Fi network (local connection)No
Depth range shadingYes
Garmin Quickdraw ContoursYes
BLUETOOTH® callingNo
Split-screen zoomYes
Raster chart supportNo
4-pin transducer ports1
Bottom Lock (shows return from the bottom up)Yes
FrequencyTraditional: 50/77/200 kHzCHIRP (mid and high)
Tide TablesNo
Power Consumption2.8
BlueChart (coastal)No
Traditional sonar (dual frequency/beam)Built-in
  • Dual-beam transducer
  • Transom and trolling motor mounts
  • Tilt/swivel mount
  • Power cable
  • Documentation

Write Your Own Review
Du omtaler:Garmin STRIKER™ 4, With Dual-beam Transducer
Din vurdering:

Skrive til oss
Send oss et notat, og vi vil komme tilbake til deg så raskt som mulig.

Copyright © 2022 Kampetorp Marin AB